Mounting the MPP on your Tail Stock
|
Dimensions for the collet, runner, or rod to
mount the MPP
|
|
Custom runner or rod made out of Drill Rod or
Hard Brass
Click on picture to enlarge.
|
MPP mounts on a common
.30" tail stock runner. Other lathes will need a collet,
runner, or rod (made to these dimensions) to mount the Morgan
Pivot Polisher . The extra cost ranges from $39 to $75. You can
make this yourself or you may find a local machine shop that will
make one or ClockBug can have this made for you.
|
|
